The Structural Characteristics of Cyclone Dust Extractor design method of the flour factory is as follows:
First, the design method of the flour factory Structural Characteristics of Cyclone Dust Extractor Tube:
*, First consider the safety wind speed, and then consider the economic wind speed. In this way, the normal operation of the wind network can be guaranteed;
Second: Under the premise that the air dust collector's air volume is unchanged, the wind network has both vertical segments and horizontal sections. Considering the wind speed to meet the horizontal section first, that is, the wind speed should ensure that when the wind network is running normally, the dust is not not dusty. It should be deposited. Therefore, when we design the wind network, the wind speed is generally taken about 14m/s. Practice has proved that there is no dust deposition during the dust removal process, and the effect is good.
Third, in a set of wind nets, if the outlets are too far away from the fan, the wind speed should be a bit larger than other points, which is conducive to ventilation and dust removal. In short, in the ventilation dust -dust air network, the closer to the fan, the higher the wind speed of the air duct; the more Lu, the longer the horizontal pipeline, the higher the wind speed, and the air speed after the air purification.
structural characteristics of cyclone dust extractor https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html
