cyclone separator construction and working suitable for small air volume scattered dust point dust removal, selection and process layout is simple. Dusty gas enters the filter chamber equipped with filter bag through the ash hopper (without the ash hopper will directly enter the bag room). The dust adheres to the outer surface of the filter bag, and the purified gas enters the upper box by the filter bag, and then is discharged to the atmosphere by the fan through the exhaust pipe. With the thickening of the filter bag, the resistance of the dust collector keeps rising, which is generally 1500pa). In order for the dust collector to continue working, it is necessary to clean the dust. The filter bags of the dust collector are arranged in a straight line. Each row of filter bags is equipped with a pulse valve to control the pulse cleaning of compressed air. The action of the pulse valve is controlled by a program controller. When cleaning, the cleaning controller gives instructions to release 0.5-0.7MPa compressed air at the moment of operation of the pulse valve. The compressed air rushes into the filter bag through the small hole on the blowpipe facing the filter bag. When it rushes into the filter bag, it induces a secondary air flow several times the compressed air, so as to generate an instantaneous shock wave and propagate down the entire length of the filter. Using this mechanism, the dust that accumulates outside the filter bag falls from the filter bag, and the clumped dust falls into the hopper. The duration of the pulse can be adjusted to suit the various characteristics of different dusts.
Cyclone separator construction and working:
1, the selection of spare parts pulse solenoid valve, cyclone separator construction and working bag to select according to the available load;
2. The type selection of cyclone separator construction and working motor determines the size of project investment and the size of excessive wind power;
3. Whether the design scheme of cyclone separator construction and working determines the damage of working pressure and the convenience of actual operation in the whole process.
cyclone separator construction and working A total of six specifications, each specification can be divided into standard with ash bucket type A and open flange type (no ash bucket) type B two. Its structure is mainly composed of filter chamber, filter bag, clean air chamber, ash hopper, ash discharge valve, pulse injection device, electric control box, etc. All the boxes are welded structure, the access door is sealed with foam rubber strip, and the dust collector is tight without air leakage.
cyclone separator construction and working principle is as follows: Dusty gas enters the filter chamber by the ash hopper (or lower open flange), coarser particles fall directly into the ash hopper or ash bin, dusty gas is filtered through the filter bag, dust is blocked in the bag table, clean gas through the bag mouth to the clean gas chamber, and is discharged into the atmosphere by the fan. When the dust on the surface of the filter bag continues to increase, resulting in the equipment resistance rising to the set value, the time relay (or differential pressure controller) output signal, the program controller starts to work, open the pulse valve one by one, so that the compressed air through the nozzle to the filter bag for dust cleaning, so that the filter bag suddenly expanded, under the action of reverse airflow, dust attached to the bag surface out of the filter bag into the ash hopper (or ash bin). Dust is discharged by the ash discharge valve. The dust collector will return to normal operation after all the bags are sprayed and cleaned.
cyclone separator construction and working https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html
