vertical cyclone separator is a dry dust filter device, mainly used to capture fine dust. So this dust collector, is mainly used for dust removal, the use of textile filter cloth, the use of fiber fabric filtration, so as to filter the dust containing gas. Is for some very small dry dust to collect, but also can directly do the work of dust removal. When social and economic development and environmental protection conflict, it is necessary to use dust collector equipment to solve the problem of environmental pollution, vertical cyclone separator dust removal rate is good. When choosing this kind of equipment, it is necessary to choose good dust bag, dust bag quality is good or bad, decide the dust removal effect of dust collector.
Below, let you know the design concept of vertical cyclone separator:
First, the application of computer aided design software, CNC machining equipment, mold production, to the combination of modular structure, can be any combination of layers and columns.
Two, the use of sleeve type polyester felt flat cloth bag, good service life.
3. This modular flat bag dust collector is designed for submerged flow, which can reduce the influence of turbulence caused by dust and save electricity and energy.
4. Modular flat bag dust collector filters dust above 0.003um, special configuration can reach the discharge requirements below 0.3mg/m3, and the whole machine noise of dust collector is less than 80dB.
5. Bag is changed outside the inspection door in front of modular flat bag dust collector to prevent dust from entering the clean air chamber, which is easy to operate and maintain.
Six, flexible inlet and outlet design, can achieve complex and changeable installation sites.
vertical cyclone separator has six standards. Its structure is composed of filter chamber, filter bag, air cleaning chamber, ash hopper, ash discharging equipment, pulse jet ash cleaning equipment, electric control box, etc. All the boxes are welded structures. The access door should be sealed. vertical cyclone separator is a small vertical cyclone separator that absorbs similar products and is planned after improvement. Widely used in metallurgy, building materials, machinery, chemical, mining and other industrial and mining enterprises non-fiber industrial dust removal purification and material recovery. vertical cyclone separator technology achieves the purpose of dust removal by using electric bag composite dust removal technology. This technology combines the advantages of electric dust removal and filter cylinder dust removal, with good purification effect and good working speed. Its working principle is to use the high pressure characteristics of electric dust removal, dust, particles and other impurities under the action of electric field force to produce opposite electricity, so as to filter out a large amount of dust, followed by the power bag composite dust removal technology has a stable pressure difference, reduce the consumption of wind energy, can control the discharge of dust, play the effect of dust removal.
vertical cyclone separator is a kind of monomer dust removal equipment with active dust removal structure. This kind of vertical cyclone separator is widely used in cement, mineral powder, mining, metallurgy, building materials, machinery, chemical industry, food processing and other industrial and mining enterprises. The bag room is at the lower part of the box body, mainly used to accommodate cloth bags and skeleton, and constitute a filtration space. The purification of dusty gas is mainly carried out here. Like the box body, according to different standards, there are also a number of rooms, separated by a partition, so as to prevent each room from disturbing each other when cleaning ash, and constitute a settlement space. The inlet and outlet can be divided into two types according to the structure of the dust collector. One is that the air inlet is round and welded directly on the side plate of the ash hopper. The air outlet is arranged on the upper part of the box body, beside the filter bag room, and communicated with the inside of the box body through the lifting valve plate hole. The other is that the inlet and outlet are made into one body, arranged on both sides of the bag room. The center between the box and the ash bucket is separated into two parts that are not breathable. Although the volume of this structure is larger, the air distribution is uniform, and the dust removal in the ash bucket is good. Suitable for use on occasions with large concentration of dusty gas.
vertical cyclone separator https://www.kaisenfilter.com/Cyclone-Separators.html
