The fault classification of fishnet twisting machine for sale is nothing more than electrical, mechanical, transmission, and pneumatic (if any), of which the electrical part is divided into strong and weak currents. Generally, the manufacturer of fishnet twisting machine for sale is designing, using and maintenance, it is considered an alarm for vulnerable and failure-prone parts. After the alarm circuit works, on the one hand, the sound and light alarm information will be issued on the display or the operation panel, and on the other hand, the protection instruction will be issued. Power off the system or stop working to ensure safety and prevent the failure from expanding.
How to reset the whole machine
Under normal circumstances, the whole machine fault caused by the instantaneous fault of the reel can be cleared by hardware reset or switching system in turn. If the working storage area of the system is disturbed due to unstable voltage, unplugging the circuit board or undervoltage of the rectifier switching power supply, etc., the system must be initialized and cleared. Before clearing, you should make a backup record of the current data. If the fault persists after reset and initialization, if it cannot be eliminated, perform hardware replacement diagnosis.
Production test run procedure
Writing a reasonable program and running it successfully is the basis for judging the integrity of the entire system. Some winding parameter setting errors may lead to system failure or invalid function. Make sure it works properly.
Make good use of various adjustable parts
It is a simple and effective method to maintain and maintain the adjustable parts such as winding tension, screen voltage, and starting position of the wire rack. Some innocuous glitches can be corrected by adjusting the adjustable section. For example, a company repairs a fishnet twisting machine for sale that has been used for many years, the system display is dim, and the screen power supply voltage is adjusted to normal.
Spare parts replacement method
During the maintenance of fishnet twisting machine for sale, replace suspected faulty parts with good spare parts. After the maintenance personnel have basically judged the cause of the failure, this method can be used to quickly diagnose the scope of the failure, quickly make the fishnet twisting machine for sale into a normal operating state, and then send the damaged parts back for repair. This is a common troubleshooting method these days.
Environmental Quality Improvement Methods
For some very strange failures, if the cause cannot be found by excluding the replacement method, it is often necessary to start up and the surrounding environment. Generally divided into two kinds of power and space. The power supply can be improved by using a regulated isolated power supply to improve the fluctuation of the power supply. For some high-frequency interference from the power supply, capacitive filtering can be used. These precautions can be used to reduce power-induced failures, increase and check for good grounding. This is also very necessary. There are many reasons for space interference, such as dust, gas, etc., foundation floating, vibration, etc., space radiation interference, etc., which requires experienced maintenance technicians and professional equipment for detection and maintenance.
fishnet twisting machine for sale https://www.newheli.com/Do-you-know-the-key-points-of-twisting-machine-operation.html
